Saturday, December 15, 2007

Blu-ray Disc - Disc structure

Laser and optics

Like its rival format HD DVD, Blu-ray uses a "blue" (technically violet) laser operating at a wavelength of 405 nm to read and write data. Conventional DVDs and CDs use red and near infrared lasers at 650 nm and 780 nm respectively.

The blue-violet laser's shorter wavelength makes it possible to store more information on a 12 cm CD/DVD sized disc. The minimum "spot size" on which a laser can be focused is limited by diffraction, and depends on the wavelength of the light and the numerical aperture of the lens used to focus it. By decreasing the wavelength, increasing the numerical aperture from 0.60 to 0.85 and making the cover layer thinner to avoid unwanted optical effects, the laser beam can be focused to a smaller spot. This allows more information to be stored in the same area. In addition to the optical improvements, Blu-ray Discs feature improvements in data encoding that further increase the capacity. (See Compact disc for information on optical discs' physical structure.)

Hard-coating technology

Since the Blu-ray data layer is closer to the surface of the disk, compared to the DVD standard, it was at first more vulnerable to scratches. The first discs were housed in cartridges for protection. Advances in polymer technology eventually made the caddies unnecessary.

TDK was the first company to develop a working scratch protection coating for Blu-ray discs. It was named Durabis. In addition, both Sony and Panasonic's replication methods include proprietary hard-coat technologies. Sony's rewritable media are sprayed with a scratch-resistant and antistatic coating. Verbatim recordable and rewritable Blu-ray Disc discs use their own proprietary hard-coat technology called ScratchGuard.


http://en.wikipedia.org/wiki/Blu-ray

No comments: